⚠️ Important Compatibility Notice

Throttles and displays are not universal or interchangeable— even if they look identical and use the same plug. Different models communicate using different electronic protocols. Before purchasing, please confirm compatibility with your specific scooter model or contact EcoMotion for assistance. For detailed guidance, see our full Throttle & Display Compatibility Guide

Front view of J&P 36-60V trigger throttle with mounting bracket and installation hardware
Rear view of the J&P 36-60V trigger throttle highlighting the original flat 6-pin connector plug, USB port and installation hardware
Angled view of the J&P 36-60V trigger throttle with original flat-head connector plug, mounting bracket and rear cover.
Alternative angled view of the J&P 36-60V trigger throttle for electric scooters
Rear view of the J&P 36-60V trigger throttle showing the flat-head 6 pin connector plug, accessible from the rear.
Front view of J&P 36-60V trigger throttle with mounting bracket and installation hardware
Rear view of the J&P 36-60V trigger throttle highlighting the original flat 6-pin connector plug, USB port and installation hardware
Angled view of the J&P 36-60V trigger throttle with original flat-head connector plug, mounting bracket and rear cover.
Alternative angled view of the J&P 36-60V trigger throttle for electric scooters
Rear view of the J&P 36-60V trigger throttle showing the flat-head 6 pin connector plug, accessible from the rear.

Throttle: JP J&P Universal Trigger Throttle 36V–60V with Colour LCD – Original Flat Head (6 pin) connector

$104.99 $94.99 Save 10%
/
Tax included.
  • Ships next business day
  • Low stock - 4 items left
  • Backordered, shipping soon

Throttle: JP J&P Universal Trigger Throttle 36V–60V with Colour LCD – Original Flat Head (6-Pin) Connector

Upgrade or replace your electric scooter throttle with this JP J&P Universal Trigger Finger Accelerator, featuring a full-colour LCD display and wide 36V–60V voltage compatibility.

Designed in the popular trigger form factor, this throttle offers smooth trigger control, clear ride data visibility, and simple installation via the original flat-head (6-pin) connector plug.

Suits Dragon GTR, GTS, GTR V2, GTS V2, Cyclone & Cyclone Pro (pre-2025 models, which connect via flat 6-pin JST-SM female connector, located inside the rear cover of the housing). NOT suitable for Dragon scooters with a display marked Jh-01 (Jh-01 Throttle available here)

Key Features

  • Universal 36V – 48V - 52V - 60V compatibility

  • Smooth trigger-finger acceleration

  • Bright colour LCD display

  • Original flat-head (6-Pin) connector plug 

  • Durable housing for daily use

P-Settings 

To access: Press BOTH [MODE] and [POWER] button to access P-Settings. 

# Setting Common Values/Options
P0 Wheel Diameter (inches) Match your tire size (e.g. 8, 10 or 11)
P1 Low-voltage cut-off
 Voltage threshold to protect the battery (e.g., 31.5 for 36V, 41.5 for 48V)
P2 Pole Number  Used for speedometer calibration (typically 15 or 16)
P3 Speed signal selection Usually set to 0 or 1
P4 Imperial/Metric (Miles or Km) 0 = Kilometers per hour (km/h), 1 = Miles per hour (mph)
P5 Push Start/Zero Start 0 = Zero-start (throttle goes immediately), 1 = Kick-start (must push off first)
P6 Cruise Control 0 = Off, 1 = On (activates after holding speed)
P7 Soft/Hard Start 0 = Strong/instant start, 1 = Soft/smooth start
P8 % of Power (Default 100) 100 = Full speed, lower values (e.g., 50) cap max speed
P9 Electric Brake Strength 0 = Off, 1 = Medium / Low, 2 = Strong braking


You may also like

Recently viewed

Back to Dragon GTS/GTS V2