Replacement Hex Diamond Display for Bexly Blackhawk, Blackhawk Pro, Blackhawk Pro Max & Apollo Phantom V2 (M10) Electric Scooters

Upgrade or replace your electric scooter's dashboard with this high-quality Hex Diamond LCD Display, compatible with the (M10) Bexly Blackhawk (52V), Blackhawk Pro (60V), Blackhawk Pro Max (60V), Apollo Phantom V2 (52V) and Apollo Phantom V2 Pro (60V). Featuring a modern, sleek design and an easy-to-read digital screen, this replacement display ensures you get accurate speed, battery life, and ride mode information at a glance. The display comes with three durable, waterproof Julet cable connectors for quick and straightforward installation.

This Hex Diamond LCD display is equipped with advanced NFC card compatibility, offering an added layer of security for your scooter. Simply tap the provided NFC card to start your scooter — no need for keys or codes. Whether you're replacing a damaged display or looking to upgrade to NFC security, this replacement LCD is designed to keep your M10 electric scooter looking and performing like new.

For models without key ignition/voltmeter.

Includes 3 x NFC Security Cards 

1. Black (6 pin, male) - short cable
2. Blue (4 pin, male) - long cable
3. Orange (3 pin, female) - long cable

Key Features:

• Compatibility: Designed for Bexly Blackhawk (52V), Blackhawk Pro (60V), Blackhawk Pro Max (60V) & Apollo Phantom V2 (52V) and Apollo Phantom V2 Pro (60V).
• Clear Digital Display: Bright LCD screen shows speed, battery level, and other ride metrics in a user-friendly layout.
• Easy Installation: Includes three robust cable connectors to quickly replace your existing display.
• NFC Compatibility: Added security with NFC card functionality — activate your scooter with a tap.
• Durable Design: Built to withstand daily riding conditions with a sleek black finish.

Benefits:

• Replace a faulty or damaged display to restore full functionality to your scooter.
• Enhance security with NFC activation.
• Keep track of essential ride information effortlessly with the high-contrast LCD screen.

Upgrade your riding experience and ensure your scooter stays in top shape with the Replacement Hex Diamond LCD Display with NFC Security.

P-Settings - Programming your Hex Diamond Display:

To access the Scooter's P-Settings:

1. Simultaneously hold both [UP] and [DOWN] arrows on right Handlebar for 3-4 seconds.
2. Press the [UP] and [DOWN] button to cycle through the settings.
3. Press the [MODE] button to change/save a setting.

• P1: LCD Brightness: Set to 3 for brightest. The drain on the battery is minimal.
• P2: Mileage display in Miles or Kilometers
• P3: Voltage:
• 52(V) - Bexly Blackhawk, Apollo Phantom V2
• 60(V) - Bexly Blackhawk Pro/Pro Max, Apollo Phantom V2 Pro
• P4: Dormancy time: The amount of time before the scooter will go to sleep/power off. We recommend setting between 5 - 10 minutes.
• P5: Unused
• P6: Wheel diameter in inches
• P7: # of magnets 30 (LOCKED)
• P8: Power Level (%): Control the amount (%) of power/top speed. The default setting is less than 100(%), in order to restrict the top speed to 25km/h. Beginner riders may choose to reduce this further. Or if riding on private property, users may adjust up to 100(%), to access all the scooter’s available power.
• P9: Zero start: Push/Kick Start or Zero start.
  Set to 0 for zero start, set to 1 for kick-start.
  We STRONGLY recommend setting to 1, so that the scooter does not lurch forward if the throttle is accidentally touched/activated. At "1" (kick start) ,you simply need to give a push/kick to give the scooter momentum, before the throttle will engage.
• P10: unused.
• P11: Electronic Braking level. 1-5 but we recommend 2 or 3. Set to 1 if you prefer more "free-roll" (and less electronic brake). 
• P12: Acceleration/Torque: 1 is soft start; 5 is high torque. Set as desired. For new riders, we recommend starting at no more than 2 or 3.
• P13: unused
• P14: unused
• P15: Controller cutoff voltage
• P16: Zero-ing of the Odometer
• P17: Cruise control: set to 0 for OFF (beginners). Set to 1 for ON (advanced riders only).
  When Cruise control is switched on, it will automatically start when the rider maintains a constant speed for 5 seconds. Cruise Control is will turn off when the brake or throttle is activated.
  Cruise control can be dangerous if you are not an experienced rider.
• P18 – P20: unused
• P19: NFC Cards: The number showing indicates the total number of NFC cards which are already connected to the display (“3” originally from factory). 
  To Add Additional NFC Cards: Place the new NFC card on the display. If the number increases by 1, you have successfully added the new card.
  You can add a maximum of five (5) NFC cards to any display.
  If there are already 5 cards connected (P19 = 5), SHORT PRESS the DOWN arrow TEN (10) times to remove all the NFC cards and then add up to 5 new cards.
• P20: unused